Universal R-320 Manual del operador descargar pdf (Pagina 24)

ADJUSTING LABEL SKEW

If the label is skewed either up or down, the applicator needs to be re-

adjusted for the skew. To do this, there is a knob under the applicator.

Turning the knob clockwise will cause the applicator to tip forward. This will

cause the trailing edge of the label to go up. Turning the knob counter

clockwise will cause the applicator to tip backwards. This will cause the

trailing edge of the label to go down. (See Fig.24)

PEELER PLATE ANGULAR ADJUSTING

The peeler plate needs to be square with the container. If the container is

slightly irregular, you can adjust for this with the peeler plate angular adjust.

To do this, there is a knob in front of the applicator. Turning the knob

clockwise will cause the applicator to tip inward. Turning the knob counter

clockwise will cause the applicator to tip outward. (See Fig.25)

Fig.24

Knob

Applier Mount

Fig.25

Knob

Applicator

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 68 69

Sin comentarios

Universal R-320 Manual del operador Pagina 24